1. Indoor installation
When LED light strips are used for interior decoration, they do not have to withstand wind and rain, so installation is very simple. Take the LED light strips produced by Guanghong Electronics as an example. The back of each LED light strip has self-adhesive 3M double-sided tape. When installing, you can directly remove the sticker on the surface of the 3M double-sided tape, and then fix the light bar on the need. Just press it flat by hand for the installation place.
2. Power connection method
The general voltage of the LED strip is 12V DC, so a switching power supply is required. The size of the power supply is determined by the power and connection length of the LED strip. If you don’t want each LED strip to be controlled by a power supply, you can purchase a relatively large switching power supply as the total power supply, and then connect all the LED strip input power sources in parallel (if the wire size is not enough, you can extend it additionally), It is powered by the main switching power supply.
3. Controller connection method
LED marquee strips and RGB full-color light strips need to use controllers to achieve variable effects, and the control distance of each controller is different. Generally speaking, the control distance of a simple controller is 10 to 15 meters, and the remote control The control distance is 15 to 20 meters, and the longest distance can be controlled to 30 meters.
4. Pay attention to the connection distance of the LED strip
Generally speaking, the longest connection distance of 3528 series LED light strips is 20 meters, and the longest connection distance of 5050 series LED light strips is 15 meters. If this connection distance is exceeded, the LED light strip will easily heat up, which will affect the service life of the LED light strip during use.