Ceiling lamps often need to be removed to replace the bulbs, and the disassembly method is relatively simple. Therefore, the daily disassembly of Op ceiling lamps and replacement bulbs can be solved by yourself. The specific disassembly method of OP ceiling lamp depends on different shapes, but the general method is not very different.
Before disassembling the ceiling lamp, it is necessary to disconnect the power at home to prevent electric shock during disassembly and assembly. The first step is to remove the mask of the Op ceiling lamp. The installation method of the mask of Op's ceiling lamp is generally to use a live buckle, just click the small arrow on the side of the mask to open the mask. The second step is to take off the mask, and then observe whether the wiring is fixed with screws or buckles. If it is fixed by screws, then use a screwdriver to remove the live zero line and then remove the base. If it is fixed by a buckle, the advantages are difficult and need to be pulled down forcefully, but in the process, you must grasp the frame with your hand, pull down slowly with one hand, and drag the ceiling lamp with the other hand to prevent the lamp It was also pulled down and damaged. The last step is to remove the lamp, replace it with an available lamp, and then perform the reverse operation to complete the installation.